STM32F4 Discovery

HAL library 01- RCC for STM32Fxxx 8

HAL library 01- RCC for STM32Fxxx

This is first description for libraries in HAL section for STM32F4 and F7 lines using HAL drivers provided from ST for each section. RCC (Reset and Clock Control) library is needed to set up clocks for running STM devices at high speed. It sets up PLL parameters provided from user and enables internal or external high speed clock. Library Read more about new HAL libraries Features Works on STM32F0xx, STM32F4xx and STM32F7xx series Enables HSE or HSI oscillator Sets PLL...

All STM32 HAL libraries 101

All STM32 HAL libraries

In this section, I will write all libraries based on HAL drivers from ST. If you see this first time, make sure you read this post first about how structure of my libs looks like! License All my softwares are published under MIT license. This means that you are allow to modify, share and use my source and other stuff in personal or commercial use. If you modify source code, it has to stay under GNU GPL v3 license too. I...

New library system built on STM32Fxxx HAL drivers 122

New library system built on STM32Fxxx HAL drivers

As you maybe saw, when STM32F7-Discovery board arrived, I switched to make libraries also for this board. And if you want easy libs for this boards, you have to switch to HAL drivers provided from STMicroelectronics. HAL drivers are basically supported for all STM32 families, so I decided to make a library in a way, that will be very easily to used with any STM32 family, especially targeted to these 3 series: STM32F0xx: For very basic and small project can...

STM32F7-Discovery. source:st.com 4

First STM32F7xx libraries are out!

After one day spending trying to make a good implementation of libraries for future use, I decided to switch to HAL drivers because of STM32F7 line which does not have STD drivers. So I decided to make libraries that way, that are supported also with STM32F4xx lines. Each line uses HAL driver for it’s version, but all projects are done in a way that you select target in Keil uVision (F4 or F7), click rebuild and everything is setup and...

STM32F7-Discovery. source:st.com 30

New STM32F7-Discovery board

After STM32F411-Nucleo, STM32F439-Eval board, ST sends me a new discovery board, STM32F7-Discovery. This is a very powerful discovery board according to other series. It is also very big with a lot of features. The STM32F7 discovery kit allows users to develop and share applications with the STM32F7 Series microcontollers based on ARM® Cortex®-M7 core. The discovery kit enables a wide diversity of applications taking benefit from audio, multi-sensor support, graphics, security, video and high-speed connectivity features. The Arduino connectivity support...

Disable peripherals in debug mode on STM32F4xx 0

Disable peripherals in debug mode on STM32F4xx

Have you ever used watchdog in your application? Have you ever debug your application when watchdog was enabled and you hit stop? Watchdog did not stop in this case and when you pressed “continue” in your debugger, your program starts over because WDG has reset your system. One choice is that you remove line where you initialize IWDG, but you then must recompile and redownload and all that stuff. Wasting useful time. To avoid this problem, STM32 devices have possibility...