Tagged: hsi

HAL library 01- RCC for STM32Fxxx 8

HAL library 01- RCC for STM32Fxxx

This is first description for libraries in HAL section for STM32F4 and F7 lines using HAL drivers provided from ST for each section. RCC (Reset and Clock Control) library is needed to set up clocks for running STM devices at high speed. It sets up PLL parameters provided from user and enables internal or external high speed clock. Library Read more about new HAL libraries Features Works on STM32F0xx, STM32F4xx and STM32F7xx series Enables HSE or HSI oscillator Sets PLL...

Library 40- Output clocks from STM32F4 14

Library 40- Output clocks from STM32F4

STM32F4 has capability to output different clocks on specific 2 pins. You are able to output clocks in original frequency (no prescaler) and also with prescaler values 2, 3, 4 and 5. 2 pins are used to output different frequencies. They are not able to output the same clocks. You can output: MCO1 HSI: High Speed Internal oscillator, 16MHz RC HSE: High Speed External oscillator, or External User clock LSE: Low speed, 32768Hz oscillator or ceramic resonator PLLCLK: Output clock...

All STM32F4 libraries 128

All STM32F4 libraries

Because there is a lot of libraries I have done, I will make a table with all of my libraries at one place. When new library will be created, it will be posted here. These libraries work on both Discovery boards, if not, it will be specified. Actually, libraries should work on STM32F4xx series of microcontrollers if they have peripherals that are need for library. All STM32F4xx MCUs don’t have everything inside. 🙂 Libraries are tested on my 4 STM32F4...