Tagged: real time clock

HAL Library 24- RTC for STM32Fxxx 23

HAL Library 24- RTC for STM32Fxxx

RTC library was ported to HAL drivers for STM32Fxxx line from my previously library RTC for STM32F4xx. If features similar things as before except some functions were changed, which are already described in HAL API. Library Read more about new HAL libraries Features Support Internal or external clock source PC14 and PC15 pins are used for external crystal oscillator STM32F4/429 Discovery does not have RTC crystal onboard. Check board’s manual on how to set it up Support wakeup interrupt Support...

All STM32 HAL libraries 106

All STM32 HAL libraries

In this section, I will write all libraries based on HAL drivers from ST. If you see this first time, make sure you read this post first about how structure of my libs looks like! License All my softwares are published under MIT license. This means that you are allow to modify, share and use my source and other stuff in personal or commercial use. If you modify source code, it has to stay under GNU GPL v3 license too. I...

Library 39- Power consumption modes for STM32F4 23

Library 39- Power consumption modes for STM32F4

For library 39, I made a low power modes library. This allows you to simple put STM32F4 into SLEEP, STOP or STANDBY mode. Point of this modes is simple. You want decrease current on device. If you are working on battery project, this will be very helpful. You can set current down to about 2uA with proper low power mode. I will tell you only the highlights of all 3 power down modes in this post. For detailed informations, check ST’s...

Library 19- Use internal RTC on STM32F4 97

Library 19- Use internal RTC on STM32F4

It’s been some time when I post last library. Next one is internal RTC library. STM32F4xx devices have Real Time Clock (RTC) inside, with support of internal calibrated 32768 Hz oscillator or external (more accurate) 32768 Hz oscillator. RTC peripheral has also backup register support, which means that when you reset MCU, registers are not reset or if power is off and you have battery connected on Vbat pin, clock is still working. RTC can also wakeup MCU from all...

All STM32F4 libraries 128

All STM32F4 libraries

Because there is a lot of libraries I have done, I will make a table with all of my libraries at one place. When new library will be created, it will be posted here. These libraries work on both Discovery boards, if not, it will be specified. Actually, libraries should work on STM32F4xx series of microcontrollers if they have peripherals that are need for library. All STM32F4xx MCUs don’t have everything inside. 🙂 Libraries are tested on my 4 STM32F4...

DS1307 I2C RTC Clock on STM32F4 33

Library 15- DS1307 Real Time Clock for STM32F4

In my 15th library, I will show you, how to operate with DS1307 Real Time Clock I2C module from maxim integrated. The DS1307 serial real-time clock (RTC) is a lowpower, full binary-coded decimal (BCD) clock/calendar plus 56 bytes f NV SRAM. Address and data are transferred serially through an I2C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in...