Tagged: stm32f7xx

HAL Library 33- DMA extension for SPI on STM32Fxxx 21

HAL Library 33- DMA extension for SPI on STM32Fxxx

SPI DMA library allows you to send and receive data via SPI in non-blocking mode. It can be use for TX only, RX only or both (transmissing mode). This library is extension for my SPI library. It requires SPI library as basic to make this to work. Library Read more about HAL libraries Features SPI extension for non-blocking TX, RX or both modes Supports all SPI peripherals on STM32F4 and STM32F7 device Supports interrupt processing Allows you to start DMA transmissing and wait till done This is...

HAL Library 31- DMA for STM32Fxxx devices 1

HAL Library 31- DMA for STM32Fxxx devices

It’s been a while since last published library. From that time, I got some requests about making DMA library for HAL and later using this library with USART, SPI, ADC and more libraries. So I’ve made a first step in DMA libraries list. Basic “root” library for DMA process has been created for managing things with DMA streams for STM32F4 and STM32F7 devices. What else it supports, you should check below. Library Read more about HAL libraries Features Root library...

HAL library 01- RCC for STM32Fxxx 8

HAL library 01- RCC for STM32Fxxx

This is first description for libraries in HAL section for STM32F4 and F7 lines using HAL drivers provided from ST for each section. RCC (Reset and Clock Control) library is needed to set up clocks for running STM devices at high speed. It sets up PLL parameters provided from user and enables internal or external high speed clock. Library Read more about new HAL libraries Features Works on STM32F0xx, STM32F4xx and STM32F7xx series Enables HSE or HSI oscillator Sets PLL...

STM32F7-Discovery. source:st.com 4

First STM32F7xx libraries are out!

After one day spending trying to make a good implementation of libraries for future use, I decided to switch to HAL drivers because of STM32F7 line which does not have STD drivers. So I decided to make libraries that way, that are supported also with STM32F4xx lines. Each line uses HAL driver for it’s version, but all projects are done in a way that you select target in Keil uVision (F4 or F7), click rebuild and everything is setup and...