Tagged: disable

Disable peripherals in debug mode on STM32F4xx 0

Disable peripherals in debug mode on STM32F4xx

Have you ever used watchdog in your application? Have you ever debug your application when watchdog was enabled and you hit stop? Watchdog did not stop in this case and when you pressed “continue” in your debugger, your program starts over because WDG has reset your system. One choice is that you remove line where you initialize IWDG, but you then must recompile and redownload and all that stuff. Wasting useful time. To avoid this problem, STM32 devices have possibility...

How to properly enable/disable interrupts in ARM Cortex-M? 8

How to properly enable/disable interrupts in ARM Cortex-M?

Point of this post is not how to use NVIC (Nested Vectored Interrupt Controller) in Cortex-M processors but how to disable/enable interrupts properly for your system to avoid strange behaviours in your code. Let’s assume you have 2 functions, which do some important stuff and they have to make sure that noone interrupts these 2 functions

Library 21- Read SD card with FatFs on STM32F4 573

Library 21- Read SD card with FatFs on STM32F4

Finally I got it working properly. Reading SDcard was very awesome for me for first time, so I decided to make a library for STM32F4xx devices and post it to my website. It’s basically just communication interface between STM32F4 and FatFS library by Chan. It supports SPI or SDIO communication. Library also supports USB communication, but for that purpose you need USB stack too. USB is available here. Below I’m showing how to setup everything with STM32F4 to get SD...