Tagged: stm32f407

Library 58- Dynamic strings on STM32F4xx 0

Library 58- Dynamic strings on STM32F4xx

Have you ever been in position where you need to store some string informations just for a small amount of time? Did you reserve ram memory before you worked with strings? If you did it like that, than this library might be a solution for you. This library was designed directly for a purpose where you need to store your information for a few time. For example, getting some string informations from your sensor, USART, etc. It uses malloc and...

How to properly set clock speed for STM32F4xx devices 65

How to properly set clock speed for STM32F4xx devices

I see that you have problems with your devices when you don’t know even (and you don’t even ask) on which speed your device is actually running. Speed of your device depends on PLL settings or clock source you have selected for system core clock. In most cases system core clock’s source is PLL output. To get proper value, you check ALWAYS first these settings when something is not working. Because I’m tired of questions that something is not working but...

Overclock STM32F4 device up to 250MHz 21

Overclock STM32F4 device up to 250MHz

Let’s test what STM32F4xx devices can do. I have all “4 speed families” at home so why not to try it how fast we can go. By default, for those who don’t know max frequencies for STM32F4xx devices, they are in list below: 84MHz: STM32F401 MCUs, including Nucleo-F401 board 100MHz: STM32F411 MCUs, including Nucleo F411 board 168MHz: STM32F405/7 and STM32F415/17 MCUs, including STM32F4-Discovery board 180MHz: STM32F427/29 and STM32F437/39 MCUs, including STM32F429-Discovery board Ok, we have everything provided, let’s test how far...

STM32F4 External interrupts tutorial 122

STM32F4 External interrupts tutorial

Each STM32F4 device has 23 external interrupt or event sources. They are split into 2 sections. First interrupt section is for external pins (P0 to P15) on each port, and other section is for other events, like RTC interrupt, Ethernet interrupt, USB interrupt and so on. October 1, 2014: Added external interrupts library. GPIO as Interrupt Interrupt lines I will show now how to configure GPIO pin to be an interrupt and how to handle it in your code with...

All STM32F4 libraries 123

All STM32F4 libraries

Because there is a lot of libraries I have done, I will make a table with all of my libraries at one place. When new library will be created, it will be posted here. These libraries work on both Discovery boards, if not, it will be specified. Actually, libraries should work on STM32F4xx series of microcontrollers if they have peripherals that are need for library. All STM32F4xx MCUs don’t have everything inside. 🙂 Libraries are tested on my 4 STM32F4...

Library 13- Reading temperature with Dallas DS18B20 on STM32F4 64

Library 13- Reading temperature with Dallas DS18B20 on STM32F4

In the last post, I show OneWire library. Today, I will use that library to show how to read temperature with Dallas’s temperature sensor DS18B20. DS18B20 Features 9 to 12 bits resolution -55°C to 125°C Celsius 64bit unique ROM number Alarm temperatures enable or disable Search devices with alarm flag set Can be parasite-powered Library Features Search sensors Read temperature Set resolution for each device Start temperature conversion on all devices simultaneously Set alarm low and high temperatures Disable alarm...