Tagged: vcp

USB to LCD converter with STM32F0 7

USB to LCD converter with STM32F0

A great electronic, Marko, did a nice project to show, how STM32F070 in 20-pin footprint can be used with USB and LCD. For 20-pin this MCU is very powerful with his 48MHz and USB with some other peripherals. For hardware specification, including schematics and PCB top layer for toner transfer, you can check an original link, posted at the end of this post.

Library 24- Virtual COM Port (VCP) for STM32F4 480

Library 24- Virtual COM Port (VCP) for STM32F4

This library provides Virtual COM port on USB OTG. This means, that you don’t need external USB->UART converter (like FTDI) to communicate with computer. STM32F4xx will be seen to computer like COM port. Library can be used on all STM32F4xx devices. It has also features to support STM32F4- and STM32F429 Discovery boards. To use USB with HAL, check my HAL USB library. Library Features Enables USB VCP Works in USB FS mode Default for STM32F4-Discovery board Works in USB HS...

All STM32F4 libraries 128

All STM32F4 libraries

Because there is a lot of libraries I have done, I will make a table with all of my libraries at one place. When new library will be created, it will be posted here. These libraries work on both Discovery boards, if not, it will be specified. Actually, libraries should work on STM32F4xx series of microcontrollers if they have peripherals that are need for library. All STM32F4xx MCUs don’t have everything inside. 🙂 Libraries are tested on my 4 STM32F4...