Tagged: discovery

Disable peripherals in debug mode on STM32F4xx 0

Disable peripherals in debug mode on STM32F4xx

Have you ever used watchdog in your application? Have you ever debug your application when watchdog was enabled and you hit stop? Watchdog did not stop in this case and when you pressed “continue” in your debugger, your program starts over because WDG has reset your system. One choice is that you remove line where you initialize IWDG, but you then must recompile and redownload and all that stuff. Wasting useful time. To avoid this problem, STM32 devices have possibility...

FFT result of matlab generated signal 58

Library 62- Fast Fourier Transform (FFT) for STM32F4xx

Here is an example of Fast Fourier Transform on STM32F4xx devices. Today, I was looking something on ARM DSP documentation and I saw that some functions for FFT used in my example are deprecated and will be removed in future. That was the main reason I decided to make a library for FFT on STM32F4xx. To use this library, some third-party libraries are also required. All these required files can be found in STM32F4xx Standard peripheral drivers and DSP instructions provided...

Library 59- Change PLL settings while STM32F4xx is running 4

Library 59- Change PLL settings while STM32F4xx is running

I’ve been already talking about topic, how to properly set clock speed for your device with PLL settings. This article could be found here and it is definetelly worth of readiny, especially for beginners. Today, it was very rainy and bad day, so I was thinking about a library that could dynamically change PLL settings. This can be used to change current consumption of your device if there is no need for very high speed clock for some time. Changing...

Library 58- Dynamic strings on STM32F4xx 0

Library 58- Dynamic strings on STM32F4xx

Have you ever been in position where you need to store some string informations just for a small amount of time? Did you reserve ram memory before you worked with strings? If you did it like that, than this library might be a solution for you. This library was designed directly for a purpose where you need to store your information for a few time. For example, getting some string informations from your sensor, USART, etc. It uses malloc and...

FatFs library extended for SDRAM 6

FatFs library extended for SDRAM

As mentioned at the beginning of post about FATFS with SDCARD, I’ve updated library to extend support for SDRAM on STM32F429-Discovery or STM324x9-EVAL board. Low level functions have been added in library for write/read data ti SDRAM. SDRAM set up To use SDRAM with my FATFS library, you will need to include my SDRAM library, which implements low level functions for read/write in SDRAM and initialization process.  Next thing, you need to do, is to open defines.h configuration file and...

Project 04- GPS Logger with STM32F4xx and USB flash drive 0

Project 04- GPS Logger with STM32F4xx and USB flash drive

It was nice Saturday day to try motor for first time this year for me. Using it with GPS logger, it was very fun to track myself where I drove for about half an hour. I’ve made a GPS data tracker using STM32F4-Discovery board. Project uses GPS device from ebay (UBLOX NEO-6M) and USB flash drive to store data onto. Project Project works with STM32F4- or STM32F429-Discovery boards. It was tested on F4-Discovery, because it has more LEDs than F429....